Products / High-temperature oils / Plurasafe® GL PG 320

Art.Nr. 068053

Plurasafe® GL PG 320

Fully synthetic, high performance gear oil based on polyalkylene glycol for demanding operating conditions

20 kg can
210 kg drum


Application

check
Suited for the lubrication of chains, tooth clutches, slide and roller bearings.
check
For the lubrication of helical, bevel helical, planetary and worm gears especially at high temperatures and under the influence of water.
check
Especially formulated for use as a industrial gearbox lubricant. Typical applications are in most severe environments e.g. fill for life of disposable gearboxes and conveyor chains.

Properties

check
Excellent EP properties
check
Excellent corrosion protection
check
Water soluble
check
High thermal stability
check
Excellent oxidation and ageing stability
check
High viscosity index
check
Very good low-temperature properties
check
Wide application temperature range
check
Compatible with many elastomers (especially NBR, FVMQ and FMQ)
check
Meets DIN 51 517-3
check
Meets ISO 12925-1 in the category CSPG and CTPG
check
FLENDER lubrication approval for helical-, bevel- and planetary gear units (A + B to 15.06.2023)
check
Significantly longer life compared to mineral oil
check
Generate lower service costs
check
Low risk for sludge and deposits
check
Lower disposal costs
check
Improved energy efficiency
check
High micro pitting resistance
check
Low friction coefficents contricutes to lower mechanical losses and higher efficiencies


Technical Data
Optics light to yellow, hazy
Color number <1.0 ASTM D 1500
Basis polyalkylene glycol
Viscosity kinematic, 40°C 330 mm²/s DIN 51562
Temperature range -35 - +150 °C

All information stated is intended to guide preliminary product selection only. The above information is neither an assurance of product properties nor is it a general statement of fitness for use in the listed applications. Please consult with our technical staff about your specific use case and technical parameters.