Products / High-temperature oils / SYN-setral-GEAR 220 N

Art.No. 066411

SYN-setral-GEAR 220 N

Fully synthetic high performance gear oil with EP additives

20 l can
200 l drum


Application

check
Especially for lubrication of highly loaded spur gears and bevel gears, even at low run-up temperatures.
check
Particularly suited for industrial gears under heaviest operating conditions.
check
Like dynamically changing loads, high temperatures, vibrations, shock loads and oscillations, to prevent surface fatigue, abrasive wear and micropitting and to extend oil change intervals compared to mineral oils.
check
Applicable for lubrication of oil-lubricated rolling and plain bearings, highly loaded sliding surfaces, circulating systems etc.
check
Typical applications: heated equipment such as extruders, calenders, kneaders, mills, conveyors, cranes, hoists etc. in the chemical, mining, cement, plastic and steel industry.

Properties

check
FLENDER lubrication approval for helical-, bevel- and planetary gear units (A to 08.2026)
check
Lowers the coefficient of friction and power losses and reduces the oil sump temperature
check
Excellent oxidation and ageing stability, thus significantly longer service life than mineral oils
check
Reliable corrosion protection for steel and nonferrous metals
check
Considerably longer service life of machine components and industrial plants
check
Permits longer oil change intervals by lower strain
check
Free from solids and silicone
check
Wide application temperature range
check
Meets the requirements of the specifications DIN 51517-3, ISO 12925-1 and of leading gear manufactures
check
Compatible with most plastics and elastomeres


Technical Data
Colour yellow DIN ISO 2049
Colour max.1.0 ASTM D 1500
Appearance liquid -
Basis PAO -
Viscosity, kinematic at 40°C 225 mm²/s DIN 51562
Temperature range -40 - +150 °C -
Short term max. temperature +180 °C -










mail_outline